Motul Tech — Lubricants
high performance
As a Motul Tech distributor, Eurotechni Industry gives you access to a complete range of industrial lubricants for machining, maintenance and heat treatment — with dedicated technical support for professionals.
8
product
families
+100
years of
lubrication expertise
About Motul Tech
Motul Tech is the industrial division of the Motul group, specialising in the design of lubricants and process fluids for the most demanding production environments. With over a century of formulation expertise, Motul Tech meets the needs of machining workshops, industrial maintenance units and heat treatment operations.
Eurotechni Industry has selected Motul Tech as a strategic supplier for its lubrication solutions. This partnership guarantees you direct access to products formulated for performance, available in packaging suited to all volumes — from 20L cans to 1000L IBCs.
1853
Founded in Paris, France
+150
Distribution countries
FDS
available on quickfds.com
AN OVERVIEW of the range by professional applications:
Machining fluids
— Microemulsions
Multipurpose microemulsion
SAKFOOL 6210
High biological stability, compatible with ferrous and non-ferrous metals, good foam resistance.
Turning
Milling
Drilling
High-performance microemulsion
Safkool 6420
Enhanced extreme-pressure lubrication — ideal for hard and stainless steels in intensive machining.
Stainless steel
Difficult machining
Semi-synthetic
Safkool 6820 SW
Excellent performance in hard water, long-lasting anti-corrosion protection, low consumption.
Aluminium
Multi-metal
— Synthetic fluids
Synthetic
Biocool 3210
Mineral-oil-free, high transparency for visual part inspection, optimum biological resistance.
Rectification
Grinding
High-resistance synthetic
Biocool 3837 GR
High thermal stability, very low foam, long sump life for precision grinding.
Rectification
Precision
— Neat oils & EDM
Neat oil
Supracut Evo 15 M / 30 G
Low and medium viscosity for bar turning, threading and tapping. Low mist, excellent EP lubrication.
Bar turning
Threading
Tapping
EDM dielectric fluid
Supracut EDM 03
High purity, very low viscosity, optimum particle evacuation. Compatible with all types of EDM machines.
Sinker EDM
Wire EDM
hydraulic fluids
— Rubric HM – anti-wear mineral oil
ISO VG 32
Rubric HM 32
Anti-wear, anti-foam, good oxidation resistance for high-pressure systems.
High pressure
ISO VG 46
Rubric HM 46
The most widely used standard viscosity. Excellent pump and cylinder protection, thermal stability.
Presses
Cylinders
ISO VG 68
Rubric HM 68
Thickened formulation for heavy loads and high temperatures. Very good shear resistance.
Heavy loads
ISO VG 100
Rubric HM 100
High viscosity for slow-moving equipment or high ambient temperatures. Optimum protection in severe conditions.
Severe conditions
— Rubric HV – high viscosity index
ISO VG 32
Rubric HV 32
Easier cold start-up, stable hot performance. Ideal for equipment exposed to wide temperature variations.
Extreme cold
ISO VG 46
Rubric HV 46
Versatile solution for modern machine tools with servo valves and piston pumps.
Servo valves
Piston pumps
HEAT TREATMENT
Accelerated quenching oil
Thermic Evo 140
For alloy steels and martensitic stainless steels. Optimised cooling rate, very low cracking tendency.
Alloy steels
Martensitic stainless steel
Fast quenching
Food-contact quenching
Thermic FGP
H1 certified — for the food industry and food-grade knifemaking. Performance equivalent to mineral oils.
Food industry
H1 certified
Slow quenching oil
Thermic TO 19 R
For complex parts and long blades. Controlled thermal gradient, minimal deformation.
Slow quenching
Complex parts
MAINTENANCE
— Greases – Irix range
Multipurpose grease NLGI 2
Irix Evo LX 200-2
Lithium complex for bearings and bearing housings. Water resistance, high temperature resistance, anti-corrosion protection.
Bearings
Bearing housings
High-speed spindle grease
Irix Ino LX 40-2
Special stainless-grade grease for HSC spindles. Low shear resistance, long service life, compatible with humid environments.
HSC spindles
High speed
Fluid grease NLGI 00 / 0
Irix L 50-00 / L 80-0
For centralised systems and open gearboxes. Excellent cold pumpability, good adhesion under load.
Centralised
Gearboxes
— Spindle, slideway & gear oils
Spindle oil ISO VG 10
Speed A 10
Very low viscosity, very low mist, excellent film for high-speed spindles and bearings.
Spindles
Slideway oil
Supra Slide 68
Anti-stick-slip, excellent resistance to emulsification with water-based cutting fluids.
Slideways
Anti-stick-slip
Gears & multifunction
Supraco MPL 100/220 · Slid Film 68/220
EP enclosed gears and multi-application oils for chains, slideways and open gears.
Gearboxes
Chains
EP
Compressor & synthetic gear oil
Alterna 100 · Gear SY 460
Long-drain compressor oil and high-performance synthetic gear oil.
Compressors
Synthetic
ADDITIVES & PROTECTION
— Cutting fluid additives
Biocide
Acticide 14
Corrective and preventive treatment against microbial growth in water-based cutting sumps.
Antibacterial
Corrective
Concentrated anti-foam
Foam Ban TK 360
Rapid foam elimination in cutting sumps. Very low effective dose, compatible with all water-based fluids.
Anti-foam
pH Corrector
MT pH Booster
Maintains the pH of cutting fluids to prevent corrosion of parts/machines and extend bath service life.
Sump maintenance
— Protection, forming & cleaning
Anti-corrosion protection
MT Ship Protect · MT Solv Protect
Long-lasting protective film for parts in storage or transit. Solvent-based version with a dry, non-sticky film.
Storage
Transit
Cold forming
Universelle 800 SC
Stamping, bending and cold forming. Good EP lubrication, facilitates part ejection.
Stamping
Forming
Industrial degreaser
Safco Kleen 60
Cleaning of parts before treatment. Effective on oils, greases and metal chips, compatible with all metals.
Before treatment
All metals
Why choose this partnership
SDS available online
All Motul Tech safety data sheets are available on quickfds.com — making REACH and regulatory compliance easier for your HSE teams.
Suitable packaging formats
From 20L cans to 1000L IBCs — products are available in formats suited to your production volumes, with bulk deliveries within 2 weeks.
Expert technical advice
Our teams have in-depth knowledge of Motul Tech applications in the context of machining and heat treatment of steels. Product selection support, sump diagnosis, process optimisation.
Steel + lubricant complementarity
By combining Alleima steels with Motul Tech fluids, Eurotechni offers you an integrated material + process approach — a single contact for your workshop.
Need to know more ? Let's talk of your project
For over 60 years, Eurotechni has been supporting craftsmen and manufacturers in their projects.
From supplying steel and lubricants to installing automated machinery, our team puts its expertise at your service.
Put your trust in an expert company that is close to its customers and firmly rooted in the heart of the Auvergne-Rhône-Alpes region.
Need information or a quote? Our team is here to advise and support you every step of the way.